Sign In | Join Free | My fazendomedia.com |
|
Brand Name : KLUK
Model Number : KNH101
Certification : ISO9001:2016;ISO14001:2016
Place of Origin : GUANGDONG,CHINA
MOQ : 500 Square Meters
Price : Negotiation
Payment Terms : T/T, L/C, D/P
Supply Ability : 30000 Square Meters
Delivery Time : 20-30 days
Packaging Details : Pearl cotton, foam cotton, plywood paper, film, wooden box
Frame Materials : Aluminum Alloy 6063
Glass : hollow; reflect; frosted; tinted; clear tempered glazing
Thickness : 1.5-2.0mm Aluminum Spring Doors
Color : bronze;grey
Hardware : handle,lock,swing hinge,screw,load,latch,etc
Opening pattern : Vertical Casement Swing
Floor spring door is a kind of embedded door shaft spring or built-in vertical floor spring. The door leaf can be opened inside and outside freely, and the door leaf is in the closed position when it is not touched. Floor spring door is a kind of common door in decoration engineering, which can be opened freely inside and outside.Aluminum Spring Doors
Installation Method:
Use the glass sucker to hold the thick glass tightly, and then hold the sucker to lift the thick glass plate. 2-3 people should lift at the same time. After lifting, the thick glass plate should be inserted into the limit slot at the top of the door frame, and then placed on the bottom bracket, and the installation position should be aligned, so that the edge of the thick glass plate can just seal the stainless steel facing seam of the side frame column.Aluminum Spring Doors
The method of fixing the thick glass on the bottom bracket is as follows: nail a wooden strip on the side of the bottom bracket, which is about 4mm away from the thick glass plate. Then, brush universal glue on the wood strip, and stick the stainless steel plate on the wood. The installation structure of the upper and lower parts of the thick glass plate is shown in figure 5-197. Glass glue is injected into the top limiting groove, the bottom bracket fixing position and the butt joint between the thick glass and the frame column.Aluminum Spring Doors
Door leaf positioning and installation method:
First, adjust the positioning pin on the door frame crossbeam with its own adjusting screw to draw out the crossbeam plane 1-2mm. Then, firm the glass door leaf, align the hole position of the rotary pin connector in the lower cross bar of the door leaf with the rotary pin shaft of the ground spring, and rotate the door leaf to sleeve the hole position into the pin shaft. Then take the pin shaft as the axis, turn the door leaf 90 degrees (pay attention to straighten the door leaf when turning), so that the door leaf and the cross beam of the door frame are at right angles. At this time, the hole of the rotary connector in the crossbeam of the door leaf can be aligned with the locating pin on the crossbeam of the door frame, and the locating pin can be pulled out and inserted into the hole of the rotary connector of the crossbeam of the door leaf for about 15mm.Aluminum Spring Doors
Performance | Parameter | National Standard |
Wind Load Resistance | 4.5<=p3>=5.0 | level 9 |
Air Tightness | q1<=0.5 | level 8 |
Water Tightness | 250<=△p>=350 | level 3 |
Thermal Insulation | / | standard |
Sound Insulation | 35=<Rw+Ctr<40 | level 5 |
|
![]() |
Reflective Double Glass Aluminium Swing Door Aluminium Spring Doors for Hotel Lobby Images |